Take a fresh look at your lifestyle.

Mouser stocks Adafruit’s Tiny GEMMA M0 for Wearables Projects

Mouser Electronics, Inc., the brand new Product Introduction (NPI) leader that empowers innovation, is currently stocking the Adafruit GEMMA M0 development board. The most up-to-date generation of Adafruit’s GEMMA group of development boards, GEMMA M0 is really a tiny 28mm 7mm microcontroller board with alligator-clip sew pads for solderless wearable applications.

?The Adafruit GEMMA M0, made available from Mouser Electronics, adds turn on the very best original Gemma board’s user friendly set up, replacing the ATtiny85 microcontroller with a stronger Microchip ATSAMD21E18 Arm Cortex-M0+ microcontroller, 32 kBytes of RAM, and 256 kBytes of flash. The microcontroller features native USB supported by every operating system, which removes the desire to download additional software for use.

The board ships with Adafruit’s CircuitPython programming language, so makers and engineers of most levels of skill can implement the GEMMA M0 out of the box without downloading software. And the board props up Arduino integrated development environment (IDE). The board features an on/off switch, reset switch, JST battery connector, and a built-in Adafruit DotStar RGB LED.

GEMMA M0 boasts three general-purpose input/output (GPIO) pads, each offering 12-bit analog input or digital input/output and supporting capacitive touch. These GPIO pads utilize same names for the reason that original GEMMA development board, which means any existing Arduino code work without changes together with the GEMMA M0. All three pads can be used hardware capacitive touch sensors, so they can drive NeoPixels or DotStars on any pins.

? To find out more, visit http://www.mouser.com/new/adafruit/adafruit-gemma-m0/.